General
Module Gauge & Cant
Module GEDO Rec Bar
Module GEDO Rec Trolley
Module GEDO Track Bar
Module GEDO Track Trolley

Trimble Access Rail

Trimble Access Rail is an application fully integrated in Trimble Access using the instrument setup routines and all instrument control features. It can work with both Trimble total stations and Trimble GNSS receivers. Several modules are available for Trimble Access Rail.



Trimble Access Rail is available for Trimble controllers with Windows and Android operating systems.

The Trimble Access Rail module Gauge & Cant combined with the Trimble GEDO CE 2.0 track measurement trolley is the field software for the Trimble GEDO Doc system and records the most important track quality parameters. The measured values are displayed during the measurement and can be exported into a protocol file directly in the field. Cant (superelevation), gauge and twist values are recorded depending on chainage.

Benefits

  • Continuous, simple and fast recording of track gauge, cant (superelevation) and twist
  • Live display of the current measured values
  • Recording and coding of important positions
  • Clear display of all important parameters
  • Measurement of long track sections even without track shut-downs and without affecting rail traffic
  • Results can be exported directly on site in a use-definable point grid

     

Application

  • Simple track control by measuring the basic track quality parameters

     

For users who want to use the optional Trimble GEDO Profiler laser measurement unit to check the track position at control points and to measure distances to structures and platforms, the stand-alone Windows application Trimble GEDO Doc is available.

 

 

The Trimble Access Rail module GEDO Rec Bar in combination with the electronic Trimble GEDO Track Bar and a Trimble S-Series total station or Trimble GNSS receiver is the field software for the Trimble GEDO Rec system for geodetic track surveying and quality control. The three-dimensional position of the track is measured and recorded together with the cant (superelevation) and gauge values.

Benefits

  • Control of the geodetic track survey with the electronic Trimble GEDO Track Bar
  • Graphical control of position overlap in the field
  • Recording of the absolute track position together with track gauge, cant (superelevation) and twist
  • Coding of individual points
  • Topo point measurement via the Trimble Access General Survey standard application

     

Applications

  • Geodetic survey with electronic track measurement bar
  • Basics for planning
  • Control survey
  • Preservation of evidence
  • Track monitoring measurements

The Trimble Access Rail module GEDO Rec Trolley in combination with the Trimble GEDO CE 2.0 track measuring trolley and a Trimble S-Series total station or Trimble GNSS receiver is the field software for the Trimble GEDO Rec system for geodetic track surveying of existing lines. In a single work step, the three-dimensional position of the track is captured together with gauge and cant (superelevation). The data obtained in this way can be used in geo-information systems, for design purposes and planning work during track reconstruction and for quality control.

Benefits

  • Control of the geodetic track survey with the Trimble GEDO CE 2.0 track measurement trolley
  • Graphical control of position overlap in the field
  • Recording of the absolute track position together with track gauge, cant (superelevation) and twist
  • Coding of individual points
  • Topo point measurement via the Trimble Access General Survey standard application

     

Applications

  • Geodetic survey with track measurement trolley
  • Basics for planning
  • Control survey
  • Preservation of evidence
  • Track monitoring measurements

 

The stand-alone Windows application Trimble GEDO Rec is available for users who wish to use the optional Trimble GEDO Profiler laser measurement unit for relative and absolute measurement of topo points.

 

The Trimble Access Rail module GEDO Track Bar in combination with the electronic track measuring bar Trimble GEDO Track Bar and a Trimble S-Series total station is the field software for the Trimble GEDO Track system for high-precision track alignment, inspection and quality control when no track measurement trolley can be used due to the construction method (e.g. Iron Horse system). The three-dimensional position of the track is compared with the specified track alignment. Offset and correction values are displayed directly on site to enable the construction crews to adjust the track accordingly.

Benefits

  • Control of geodetic track survey with electronic Trimble GEDO Track Bar
  • Live display of differences between actual and design according to track alignment
  • Calculation either horizontally or in a canted (superelevated) system
  • Display and stake out of track main points
  • Full support of track alignment (horizontal alignment, chainage line, vertical alignment, and cant alignment (superelevation))
  • Handling of track shears
  • Handling of gauge extensions (in tight radii and high-speed switches)
  • Handling of precamber definitions on bridge structures (compensation for deflection)
  • Capturing of the absolute track position with track gauge, cant (superelevation) and twist
  • Measurement of topo points via the Trimble Access General Survey standard application
  • Graphical control of station overlap in the field
  • Coding of individual points utilizing a code list

     

Applications

  • High-precision track installation with electronic track measurement bar
  • Control measurement and quality control

The Trimble Access Rail module GEDO Track Trolley in combination with the Trimble GEDO CE 2.0 track measurement trolley and a Trimble S-Series total station is the field software for the Trimble GEDO Track system for high-precision track alignment, inspection and quality control. The three-dimensional position of the track is compared with the specified track alignment. Offset and correction values are displayed directly on site to enable the construction crews to adjust the track accordingly.

Benefits

  • Control of geodetic track survey with Trimble GEDO CE 2.0 track measurement trolley
  • Live display of differences between actual and design according to track alignment
  • Calculation either horizontally or in a canted (superelevated) system
  • Display and stake out of track main points
  • Full support of track alignment (horizontal alignment, chainage line, vertical alignment, and cant alignment (superelevation))
  • Handling of track shears
  • Handling of gauge extensions (in tight radii and high-speed switches)
  • Handling of precamber definitions on bridge structures (compensation for deflection)
  • Capturing of the absolute track position with track gauge, cant (superelevation) and twist
  • Measurement of topo points via the Trimble Access General Survey standard application
  • Graphical control of station overlap in the field
  • Coding of individual points utilizing a code list

     

Applications

  • High-precision track installation with track measurement trolley
  • Control measurement and quality control

     

The stand-alone Windows application Trimble GEDO Track is available for users who want to use the optional Trimble GEDO Profiler laser measurement unit for relative and absolute measurement of topo points, or users who want to use the optional rail inclination sensors to query, display and store the measured values.